Autenticazione forte
2FA / MFA tradizionale
MFA per AD, LDAP e database
Self-Service Password Reset (SSPR)
Autenticazione Wi-Fi
Registrazione delle visite
Per iniziare
2FA / MFA tradizionale
Documentazione API
Kit di sviluppo software (SDK)
Token hardware TOTP programmabile in formato tessera, compatibile con i sistemi di autenticazione che supportano TOTP
Token hardware TOTP tradizionale con supporto dell'algoritmo SHA-1
Token hardware TOTP programmabile in formato portachiavi, compatibile con qualsiasi sistema di autenticazione
Token hardware TOTP tradizionale con supporto dell'algoritmo SHA-256
Integrazioni più richieste
App 2FA gratuita con backup cloud, trasferimento semplice dei token su un nuovo smartphone e protezione tramite PIN e autenticazione biometrica
Ricezione gratuita di codici OTP tramite chatbot nelle app di messaggistica
Invio di password monouso (OTP) tramite SMS
Invio gratuito di password monouso (OTP) tramite email
Invio gratuito di password monouso (OTP) tramite notifiche push
You can set up Barracuda SSL VPN two-factor authentication (2FA) with Protectimus using the RADIUS protocol:
- Get registered with Protectimus SAAS Service or install the On-Premise 2FA Platform and configure basic settings.
- Install and configure Protectimus RADIUS Server.
- Configure Barracuda SSL VPN authentication policies.
Choose your deployment option and complete the basic setup:
Protectimus Cloud Service
Protectimus On-Premise Platform
| Server Address | IP of server where the Protectimus RADIUS Server component is installed. |
| Server Port | Indicate 1812 (or whichever port you configured in the Protectimus radius.yml file when configuring Protectimus RADIUS Server). |
| Server Key | Indicate the shared secret you created in the Protectimus radius.yml file (radius.secret property) when configuring Protectimus RADIUS Server. |
| Group Attribute | Keep the default value. |
| Group Attribute Delimiter | Keep the default value. |
| NAS ID | If your RADIUS server requires NAS credentials to be set, enter the NAS identifier. |
| NAS IP Address | If your RADIUS server requires NAS credentials to be set, enter the NAS IP Address. |
| NAS IP Port | If your RADIUS server requires NAS credentials to be set, enter the NAS IP Port. |
| Group Information From | Set to blank/empty. |