Autenticazione forte
2FA / MFA tradizionale
MFA per AD, LDAP e database
Self-Service Password Reset (SSPR)
Autenticazione Wi-Fi
Registrazione delle visite
Per iniziare
2FA / MFA tradizionale
Documentazione API
Kit di sviluppo software (SDK)
Token hardware TOTP programmabile in formato tessera, compatibile con i sistemi di autenticazione che supportano TOTP
Token hardware TOTP tradizionale con supporto dell'algoritmo SHA-1
Token hardware TOTP programmabile in formato portachiavi, compatibile con qualsiasi sistema di autenticazione
Token hardware TOTP tradizionale con supporto dell'algoritmo SHA-256
Integrazioni più richieste
App 2FA gratuita con backup cloud, trasferimento semplice dei token su un nuovo smartphone e protezione tramite PIN e autenticazione biometrica
Ricezione gratuita di codici OTP tramite chatbot nelle app di messaggistica
Invio di password monouso (OTP) tramite SMS
Invio gratuito di password monouso (OTP) tramite email
Invio gratuito di password monouso (OTP) tramite notifiche push
This guide outlines the process of setting up Protectimus multi-factor authentication (MFA or 2FA) for NetApp Virtual Desktop Service (VDS) using the RADIUS protocol.
When integrating Protectimus two-factor authentication with NetApp Virtual Desktop Service via RADIUS, the Protectimus Cloud 2FA Service or On-Premise 2FA Platform serves as a RADIUS server through a dedicated connector known as Protectimus RADIUS Server. On the other hand, NetApp VDS operates as a RADIUS client.
Here’s how it functions: the Protectimus RADIUS Server connector forwards authentication requests from NetApp VDS to the Protectimus multi-factor authentication (MFA) server. Depending on the response received, access is either granted or denied.
Below, we offer an example of how to integrate Protectimus 2FA with NetApp Virtual Desktop Service for seamless NetApp VDS MFA.
You can set up multi-factor authentication (2FA) for NetApp VDS with Protectimus using the RADIUS protocol:
- Get registered with Protectimus SAAS Service or install the On-Premise 2FA Platform and configure basic settings.
- Install and configure Protectimus RADIUS Server.
- Add Protectimus as RADIUS Server for NetApp Virtual Desktop Service.
Choose your deployment option and complete the basic setup:
Detailed instructions for installing and configuring the Protectimus RADIUS Server for NetApp Virtual Desktop Service two-factor authentication using RADIUS are available in our Protectimus RADIUS Server Installation Guide for NetApp Virtual Desktop Service 2FA.
| Label | Come up with a name for your RADIUS server. |
| Hostname/Address | IP of server where the Protectimus RADIUS Server component is installed. |
| Authentication Port | Indicate 1812 (or whichever port you configured in the Protectimus radius.yml file when configuring Protectimus RADIUS Server). |
| Authentication type | PAP authentication is required. |
| Shared secret code | Indicate the shared secret you created in the Protectimus radius.yml file (radius.secret property) when configuring Protectimus RADIUS Server. |
| Server timeout (in seconds) | Set to 90 seconds. |
| Max attempts | This specifies how many times the authentication request should be sent. Set to 1. |
Integration of two-factor authentication (2FA/MFA) for your NetApp Virtual Desktop Service is now complete.
If you have other questions, contact Protectimus customer support service.