Autenticazione forte
2FA / MFA tradizionale
MFA per AD, LDAP e database
Self-Service Password Reset (SSPR)
Autenticazione Wi-Fi
Registrazione delle visite
Per iniziare
2FA / MFA tradizionale
Documentazione API
Kit di sviluppo software (SDK)
Token hardware TOTP programmabile in formato tessera, compatibile con i sistemi di autenticazione che supportano TOTP
Token hardware TOTP tradizionale con supporto dell'algoritmo SHA-1
Token hardware TOTP programmabile in formato portachiavi, compatibile con qualsiasi sistema di autenticazione
Token hardware TOTP tradizionale con supporto dell'algoritmo SHA-256
Integrazioni più richieste
App 2FA gratuita con backup cloud, trasferimento semplice dei token su un nuovo smartphone e protezione tramite PIN e autenticazione biometrica
Ricezione gratuita di codici OTP tramite chatbot nelle app di messaggistica
Invio di password monouso (OTP) tramite SMS
Invio gratuito di password monouso (OTP) tramite email
Invio gratuito di password monouso (OTP) tramite notifiche push
This Cisco Switches 2FA guide shows how to add two-factor authentication for Cisco Switches Login with the help of Protectimus 2FA Service or On-Premise 2FA Platform.
Protectimus two-factor authentication system communicates with Cisco network equipment using the RADIUS protocol. The Protectimus RADIUS Server component acts as a RADIUS server. It accepts incoming authentication requests via the RADIUS protocol, contacts the user storage (Active Directory, etc.) to verify the login and password, and then contacts the Protectimus 2FA server to verify the one-time password. If both authentication factors are correct, the Protectimus RADIUS Server allows the user to login.
The scheme of work of the Protectimus solution for Cisco switches two-factor authentication is shown below.
When you set up two-factor authentication for Cisco Switches, you make your users enter two different factors of authentication when they get access to the Cisco Switch.
After you enable two-factor authentication (2FA) for Cisco Switches login, it becomes too hard to hack it. It’s almost impossible to get both authentication factors at the same time. Moreover, a one-time passcode validity time is only for 30 seconds, so the intruder will have too little time to hack the second factor.
Two-factor authentication (2FA / MFA) is an effective protection measi=ure against such cybersecurity threats like phishing, social emgeneering, brute force, keylogging, MITM attacks, data spoofing, etc.
You can set up Cisco Switches two-factor authentication (2FA) with Protectimus using the RADIUS protocol:
- Get registered with Protectimus SAAS Service or install the On-Premise 2FA Platform and configure basic settings.
- Install and configure Protectimus RADIUS Server.
- Configure Cisco Switches authentication policies.
Choose your deployment option and complete the basic setup:
Protectimus Cloud Service
Protectimus On-Premise Platform
Detailed instructions for installing and configuring the Protectimus RADIUS Server for Cisco Switches 2-factor authentication using RADIUS are available in our Protectimus RADIUS Server Installation Guide for Cisco Switches 2FA.
Switch(config) #radius server [configuration-name]
Switch(config-radius-server) #address ipv4 hostname [auth-port integer] [acct-port integer]
Switch(config-radius-server) #key [shared-secret]
Switch(config) #aaa group server radius [group-name]
Switch(config-sg-radius) #server name [configuration-name]
Switch(config) #aaa authentication login [default | list-name] group [group-name] local
Integration of two-factor authentication (2FA/MFA) for your Cisco Switches is now complete.
If you have other questions, contact Protectimus customer support service.